Stellenbosch engineering firm Octoco has helped Sandton company Gap Draught rebuild the hardware it uses to help keep SA restaurant and pub owners in business: the device that measures every draught beer poured at the tap gives rich data, so owners can manage their business better. But it also had to be able to keep working during a power outage.
Gap Draught had a working prototype, but it needed pro engineers to get it up to the level that owners needed. So they brought in Octoco, who halved the size of the original device and enabled it to keep working even through power cuts. So now nothing should stop your enjoyment.
Gap Draught's system tracks how much beer is poured, when, at what temperature and whether the line is being cleaned, and compares it with what a bar actually sells.
Insights on draught beer monitoring
Draught beer is one of the few products a bar sells without measuring it at the point of sale. Beer leaves the keg, but what reaches the glass depends on how it is poured, how the line is set up and what happens between shifts. Gap Draught estimates that up to 30% of what is poured can go unbilled, through over-pouring, spillage or drinks that are never rung up.
Its system catches that by putting sensors on each tap. Gap Draught had a working product, but its hardware was too big and lacked the reliability and backup power needed in busy bars.
Octoco started again. Instead of fitting the electronics into an off-the-shelf box, it worked with an industrial designer on an enclosure built around the product and how it is installed. It also linked the sensors in a chain that carries both power and data, so one gateway can serve up to 128 sensors without a separate connection for every tap.
Each setup now measures pour volume, beer temperature and the conductivity of the liquid in the line, which shows whether it is beer, water or cleaning solution, plus a separate probe in the cooler.
The gateway has its own SIM card and cellular connection, so it does not depend on the venue's Wi-Fi, and a backup battery keeps it and the sensors running for about 4 to 6 hours during a power cut.
The result is hardware 50% smaller than before. Bars can use the data to compare beer poured with beer sold, spot over-pouring and after-hours pours, and check serving temperatures and cleaning, while breweries get a view of how their beer is poured and sold across their network of venues.
What others are saying about draught beer monitoring
Octoco's case study describes the project as engineered as one system, spanning electronics, sensors, connectivity, power and enclosure design. Gap Draught's own site says it now monitors more than 15,000 taps across South Africa and the UK, and the company was founded in 2015, calling itself South Africa's first internet-connected draught monitoring service.
Built for South African conditions
The interesting part of this project is how much of the design was shaped by local realities. A system that relies on a bar's Wi-Fi and mains power will fail exactly when you need it most in South Africa, so the gateway carries its own cellular link and battery.
Those same choices make the product more reliable anywhere, which helps a company that now also sells in the UK. There is a useful lesson for hardware founders too. Off-the-shelf parts are the fastest way to prove a concept works, but they limit how small, reliable and cheap to install a product can become.
Gap Draught proved its idea with existing hardware before investing in a custom design, and that is often the right order. It also adds to a run of work we have covered from South African engineering firms, including Octoco's software inside an FDA-listed medical insole and its stake in rail sensor company HisWay Labs. Disclosure: Octoco is a partner of The Open Letter's Founder Stack.
You might also like our piece on VezoPay's payment ring, the Karoo Tech Hub, and Netstar's vehicle data.
Get more SA tech and business news and subscribe to The Open Letter.


